To activate the code for any of these probe cycles
- Handle jog the probe into position (This may also be done after activating the code. There will be a diagram when you activate the code showing where the probe should be placed.)
- Press the “Edit” button
- Press “F1” to activate the menu
- Scroll down to “visual quick code” and press enter
- Scroll to “Spindle Probe 1-9”, and press enter
- Select the desired probe cycle and press enter
- Enter the required dimensions and press enter after each dimension (there will be a diagram showing what each measurement is of)
- In the dialog box that pops up after you enter the final dimension, scroll down to “MDI” and press enter
- The code is now ready and you can press “Cycle Start” to start the probe cycle